By using multi blocks within BlockSim, a single block can represent multiple identical blocks in series or in parallel configuration. This technique is simply a way to save time when creating the RBD and to save space within the diagram. Each item represented by a multi block is a separate entity with identical reliability characteristics to the others. However, each item is not rendered individually within the diagram. In other words, if the RBD contains a multi block that represents three identical components in a series configuration, then each of those components fails according to the same failure distribution but each component may fail at different times. Because the items are arranged reliability-wise in series, if one of those components fails, then the multi block fails. It is also possible to define a multi block with multiple identical components arranged reliability-wise in parallel or k-out-of-n redundancy. Figure 4.24 demonstrates the use of multi blocks in BlockSim.
Figure 4.24: Illustrating multi blocks.
See Also:
RBDs and Analytical System Reliability
Go
to weibull.com
Go
to ReliaSoft.com
©1999-2007. ReliaSoft Corporation. ALL RIGHTS RESERVED.